Heating problem of screw vacuum pump

Heating problem of screw vacuum pump With the development of industry now, we should be very familiar with the screw vacuum pump, because its characteristics are widely used, in order to understand it better, let's understand the heating problem of screw vacuum pump together.Now the screw vacuum pump has excellent corrosion resistance. When using the screw vacuum pump, we will encounter the situation that the inner wall temperature of the reducer is very high two hours after starting. This situation is very unusual for machinery and equipment. Therefore, we should solve it immediately. If the temperature does not drop, please note that the oil window on the screw vacuum pump cannot be used with the plexiglass plate. Lift the low temperature cooler to the vacuum pumping position of screw vacuum pump, and apply cooling water of minus 10 degrees to reduce the temperature.Screw vacuum pump manufacturers remind to reduce the temperature of working fluid in front of screw vacuum pump, measures should be taken to reduce the temperature, less than 20 degrees, in order to achieve better results.Industrial craneRoots BlowersRoots Vacuum Pump